Electrical work is the most strictly licensed trade in Australia — and for good reason. A faulty connection can cause electrocution, fire, or death, and unlicensed work can void your home insurance and leave you liable when you sell. Yet every year, homeowners are injured or lose properties because someone unqualified attempted work that legally required a licensed electrician.

Whether you're starting your electrical career or choosing who to let into your switchboard, this guide covers how electrical licensing works in Australia, the licence types, how to get licensed step by step, and how to verify an electrician in 30 seconds.

Why Electrical Work Must Be Done by a Licensed Electrician

In every Australian state and territory, it is illegal to perform prescribed electrical work without the appropriate electrical licence. Prescribed work includes:

  • Installation, alteration, repair or maintenance of electrical wiring and installations (switchboards, circuits, power points, lighting)
  • Connecting or disconnecting fixed-wired equipment (hot water systems, ovens, air conditioning units)
  • Working on switchboards, safety switches (RCDs), and mains connections
  • Testing and compliance certification of electrical installations

The only limited exceptions are like-for-like plug-in tasks (changing a light globe, plugging in an appliance) — and even then, anything behind the wall or inside the switchboard is off limits without a licence.

⚡ Penalties are severe: Unlicensed electrical work can attract fines of $20,000–$100,000+ for individuals and far more for companies, plus prosecution. If unlicensed work causes a fire or injury, criminal liability and voided insurance follow.

Licence Types: What Covers What

Terminology varies slightly by state, but most jurisdictions recognise the same tiers:

Licence Type What It Allows Who Holds It
Electrical Mechanic / Electrical Worker (A Grade) Perform prescribed electrical work unsupervised Qualified electricians
Electrical Contractor / Electrical Contractor Licence Contract for and supervise electrical work as a business — requires a nominated Qualified Technical Person (QTP) Business owners employing electricians
Restricted Electrical Licence Limited scope — e.g., disconnect/reconnect or specific equipment (plumbers, air con techs, refrigeration mechanics) Related trades with add-on endorsement
Apprentice / Trainee Permit Perform work only under direct supervision of an A Grade electrician while completing training Apprentices

Important: A contractor licence alone does not let you personally do the wiring — the business must have both a contractor licence and a licensed worker performing the job. Always check both when hiring a company.

How to Get Your Electrical Licence: Step by Step

Step 1: Complete the Qualification

The core qualification is Certificate III in Electrotechnology Electrician (UEE30820), typically delivered as a 4-year apprenticeship combining paid on-the-job work with off-the-job training at a Registered Training Organisation (TAFE or private RTO).

Training covers electrical principles, wiring rules (AS/NZS 3000), testing, fault finding, switchboard installation, safety, and the National Construction Code. You will be issued an apprentice training permit to work under supervision during this period.

Step 2: Complete Supervised Experience and Capstone Assessment

After the Cert III, most states require:

  • 12 months of supervised on-the-job experience (often concurrent with the apprenticeship)
  • A Licensed Electrician's Assessment (LEA) or Capstone Assessment — a practical and theory exam assessing safe work, testing, and compliance to AS/NZS 3000
  • A Safe Working Practice assessment

Step 3: Apply to Your State Regulator

Lodge your application with proof of qualification, LEA/Capstone results, ID, and the application fee. Processing is typically 2–6 weeks.

Fees (indicative 2026): $150–$400 for an A Grade worker licence (1–5 year term depending on state) plus LEA fees ($300–$600). Contractor licences cost more and require proof of insurance. Always check your regulator's current fee schedule.

Step 4: Maintain and Renew

  • Renew every 1–5 years (varies by state) — late renewal may require re-assessment
  • Complete any required CPD (e.g., wiring rules updates when AS/NZS 3000 is revised)
  • Maintain mandatory insurance — public liability ($5–20M) and, for contractors, compliance with licensing insurance requirements
  • Issue Certificates of Electrical Safety / Compliance for prescribed work as required by your state

Why Homeowners Must Only Hire a Licensed Electrician

  • Safety — Incorrect polarity, poor earthing, or overloaded circuits can electrocute occupants or start fires months after the job. Licensed electricians test every circuit to AS/NZS 3000 before leaving site.
  • Insurance validity — Home, landlord, and strata insurers routinely deny claims where unlicensed electrical work contributed to a loss. One denied fire claim can cost hundreds of thousands.
  • Compliance certificates — Licensed electricians must issue a Certificate of Electrical Safety / Compliance on prescribed work. Without it, you have no proof the work meets code — and you will be asked for it when selling or claiming.
  • Legal protection — Licensed work carries statutory warranties (6 years in many states) and access to regulator dispute resolution. Unlicensed work gives you neither.
  • Resale value — Conveyancers and building inspectors increasingly ask for compliance certificates for renovations. Unlicensed work can delay or derail a sale.

How to Check an Electrician's Licence in 30 Seconds

  1. Ask for their electrical licence number and the name on the licence
  2. Search it on your state's public register (links in table above) or call the regulator
  3. Confirm the licence is current, classes cover the work you need, and — for companies — that they hold a separate contractor licence
  4. Ask that the compliance certificate be issued in your name upon completion and retain it with your property records
💡 Red flags: No licence number on quote or vehicle, cash-only with no certificate, "I can do it cheaper without the paperwork," or unwillingness to be checked on the public register — walk away.

Need a licensed electrician near you?

Find verified, reviewed electricians on ServiceTradie.com.au — check licences, compare reviews, and request a quote in minutes.

Find an Electrician

For Tradies: Electrical + Related Licences

If you work across trades, be aware of the licence stack:

  • ARCtick — required to handle refrigerant on air conditioning (see our ARC Licence Guide)
  • Restricted electrical — plumbers and air con techs who disconnect/reconnect equipment need the restricted endorsement, not a full A Grade
  • Solar / battery — requires electrical licence plus Clean Energy Council / Solar Accreditation Australia accreditation to claim STCs and rebates — see our Solar & Battery Guide

Holding and advertising the correct licence combination is the fastest way to win trust — and to avoid the exclusions that void public liability policies when work is performed outside your licensed scope (see our Public Liability Guide for Tradies).


This article is general information only and does not constitute legal or licensing advice. Electrical licensing requirements, licence classes, fees, and certificate obligations vary by state and change periodically. Always verify current requirements with your state electrical safety regulator listed above.