If you work with tools on someone else's property, public liability insurance is the single most important policy your business will ever hold. One burst pipe that floods a client's home, one ladder that scratches a luxury car, one apprentice who accidentally drills through a live cable — and without the right cover, you're paying the claim out of your own pocket.

For Australian tradies — plumbers, electricians, air conditioning technicians, locksmiths, pest controllers, glaziers, and every other field service — public liability isn't just sensible, it's often mandatory to get work. This guide explains what it covers, how much you need, what it costs, common exclusions, and how to choose a policy that actually protects you.

What Is Public Liability Insurance?

Public liability (PL) insurance protects your business when your work causes injury to a person or damage to property belonging to someone else — a client, tenant, member of the public, or their property. It covers:

  • Compensation — the cost of repairing damage or compensating injury (medical costs, loss of income, pain and suffering where applicable)
  • Legal defence — solicitor and court costs if a claim is disputed or litigated
  • Clean-up and rectification — where required as part of the remedy

It does not cover injury to your own employees (that's workers' compensation), damage to your own tools or vehicle (separate tool / commercial motor policies), or faulty workmanship itself — though the consequence of faulty workmanship (e.g., water damage from a leaking joint you installed) is typically covered under PL.

💡 Think of it this way: If a client or bystander could reasonably claim "your business caused this and should pay to fix it," public liability is the policy that answers.

What Does It Cover? Real Tradie Examples

Scenario Trade Covered by PL?
Ladder slips and shatters a client's floor-to-ceiling window Glazier / Painter ✅ Yes — property damage
Refrigerant leak from your brazed joint damages a ceiling and causes a tenant to seek medical attention Air Con / Refrigeration ✅ Yes — property damage + personal injury
Client trips over your extension lead and breaks their wrist Any field service ✅ Yes — personal injury
You dent your own ute reversing on site Any ❌ No — own vehicle (motor policy)
Your apprentice is injured using your drop saw Any ❌ No — workers' compensation
A pipe you installed leaks and floods a home — cost is water damage, not re-doing the joint itself Plumber ✅ Consequential damage covered; rectifying the faulty joint itself typically excluded

How Much Cover Do You Need?

In Australia, public liability is sold in limits per claim — most commonly $5 million, $10 million, or $20 million:

  • $5 million — the legal minimum in some states for contractor licensing (e.g., QBCC in Queensland). Suitable for low-risk, domestic-only sole traders with no employees.
  • $10 million — the industry standard for most trade businesses. Required by many real estate agencies, builders, and commercial clients before they'll let you on site.
  • $20 million — required for government, strata, shopping centre, and large commercial work. Increasingly the expectation for air conditioning, fire protection, and electrical contractors on commercial sites.

Our recommendation: If the cost difference is modest (often $100–$300/year between $10M and $20M), take the higher limit. The premium uplift is small compared with the risk of a catastrophic claim — a single fire or major water event in a multi-storey building can exceed $5 million quickly, and many commercial contracts will exclude you if you only hold $5M.

⚠️ Check your contracts: Some head contractors and facilities managers require you to be named as an insured party or to provide a Certificate of Currency listing their business as an interested party. Allow 1–2 business days for your insurer to issue this.

What Does Public Liability Cost for Tradies?

Premiums depend on your trade risk class, revenue, number of staff, claims history, and cover limit. As a rough guide for 2026:

  • Sole trader, low-risk trade (e.g., locksmith, pest — general) — $350–$700/year for $10M
  • Mid-risk trade (e.g., air conditioning, glazing, general plumbing) — $600–$1,200/year for $10M
  • Higher-risk trade (e.g., roofing, excavation, hot works) — $1,000–$2,500+/year for $10M
  • With employees — add workers' comp separately; PL premium scales modestly with headcount and turnover

These are indicative ranges — always get a tailored quote. Specialist trade brokers often bundle PL with tool, personal accident, and professional indemnity at a lower combined cost than buying separately from a general insurer.

Common Exclusions and Gaps That Catch Tradies Out

Even with a valid PL policy, claims are frequently reduced or denied because of exclusions buried in the Product Disclosure Statement (PDS):

  • Unlicensed work — most policies exclude liability arising from work you were not licensed to perform (e.g., restricted electrical work without an electrical licence, or termite inspections without timber pest cover). Your PL does not cure unlicensed activity.
  • Faulty workmanship itself — PL covers the consequence (water damage, fire damage) but not the cost of re-doing the defective work itself. Contract works or professional indemnity may be needed for that.
  • Asbestos and hazardous materials — often sub-limited or excluded unless specifically endorsed. If you disturb asbestos while drilling or cutting, standard PL may not respond.
  • Underground services — damage to underground pipes and cables may be excluded unless you obtained dial-before-you-dig plans and followed them.
  • Hot works — welding, grinding, and heat-gun use can carry a hot-works exclusion or requirement for a fire watch — disclose this activity when obtaining cover.
  • Height limits — some policies impose a height exclusion (e.g., no work above 10–15 metres) unless endorsed. Roofing and high-rise glazing contractors should check this carefully.
  • Contractual liability — liability you assume under a contract that goes beyond your common-law liability may be excluded unless the policy includes a contractual liability extension.

Tip: Read the PDS exclusions section before you buy, and tell your broker every activity you perform — including side services like "we also do a bit of ..." — so the policy is endorsed for the full scope of your work.

Public Liability vs Professional Indemnity — Do You Need Both?

Many tradies are surprised to learn that PL alone is not enough if you provide advice, reports, or certification:

  • Public Liability — covers physical injury / property damage caused by your business operations.
  • Professional Indemnity (PI) — covers financial loss arising from your professional advice, design, inspections, and reports where no physical damage has yet occurred — or where the loss is purely economic.

You likely need PI in addition to PL if you:

  • Issue timber pest / termite inspection reports
  • Provide compliance certificates, Form 15, or fire safety declarations
  • Design air conditioning, hydraulic, or access control systems
  • Offer consultancy or project management alongside installation

For many trades, a combined PL + PI package is the most cost-effective option and avoids the coverage gap between "we did the work" and "we advised on the work."

How to Choose a Policy and Prove Cover to Clients

  1. Use a trade-specialist broker — they understand endorsements for height, hot works, underground services, and termite/PI add-ons that general insurers miss. For pest managers, a pest-specialist broker such as AVISO Specialty handles the specific distinctions between general, termite, and pre-construction liability that a generic PL policy may not capture.
  2. Match the limit to your work, not your budget — $10M minimum is the practical floor for anyone doing commercial or strata work.
  3. Declare everything — every location, every service, every subcontractor, and any use of heat, heights, or hazardous materials.
  4. Ask for a Certificate of Currency — and send it proactively with quotes. Clients who receive proof of insurance before asking are more likely to choose you over a competitor who waits to be asked.
  5. Display it — keep your current certificate in your business portal and link to it from your ServiceTradie listing, your Google Business Profile, and your email signature.

Win more work with verified insurance

Customers on ServiceTradie.com.au actively look for insured, licensed professionals. List your business for free, display your public liability cover, and turn trust into enquiries.

List My Business Free

Checklist Before You Renew

  • ☐ Is your cover limit at least $10M (ideally $20M for commercial work)?
  • ☐ Are all your activities, including side services, explicitly listed on the schedule?
  • ☐ Do height, hot works, and underground services endorsements match your actual work?
  • ☐ If you issue reports or certificates, do you also hold professional indemnity?
  • ☐ Have you declared all subcontractors and employees?
  • ☐ Can you produce a current Certificate of Currency within hours, not days?

If any answer is "no" or "not sure," call your broker before your next job — not after an incident.


This article is general information only and does not constitute insurance, legal, or financial advice. Policy terms, required limits, exclusions and licensing requirements vary by trade, state, and insurer. Always read the Product Disclosure Statement (PDS) and seek advice from a licensed insurance broker for your specific circumstances.